This agreement was filed through SEDAR on December 3, 2010.

It has therefore been argued that the TRIPS standard of requiring all countries to create strict intellectual property systems will be detrimental to poorer countries’ development.[13][14] It has been argued that it is, prima facie, in the strategic interest of most if not all underdeveloped nations to use the flexibility available in TRIPS to legislate the weakest IP laws possible.[15] The WTO also coordinates with a wide range of other international organizations, in particular as regards the organization of symposia, training activities and other events on intellectual property and trade and how these relate to other policy dimensions, such as public health and climate change. The obligations under TRIPS apply equally to all member states, however developing countries were allowed extra time to implement the applicable changes to their national laws, in two tiers of transition according to their level of development (agreement). Doing this might sound like a great hassle, but now you can use online rental agreement services. LegalDesk provides ready-to-use, lawyer verified, online rental agreement. You can use them to create an agreement in a matter of minutes. From an horde of MNCs to ancient temples, Chennai has got it all. Hence, it is no big surprise that a good number of educated people migrate to cities like Chennai and Coimbatore mostly for jobs, this in turn has increased the demand for rental properties there. Which brings us to the point of this article, how do you make a rental agreement in cities of Tamil Nadu? If disagreements occur in the future, the rental agreement is going to be a focal point of the legal battle. A voidable contract is a contract that is unenforceable due to some operation of law. For example, most contracts between adults and minors under the age of 18 cannot be enforced by the adult against the minor. The contract is voidable. Because the minor is not bound, the promise has the effect of being illusory. Nevertheless, the contract can be enforced by the minor against the adult even though the minor is, due to applicable law, not bound by the agreement. This is an exception to the rule of mutuality of consideration. Sometimes agreements leave open certain terms like price or quantity and allow one of the parties to determine that term. For example: However, the courts have established numerous exceptions to the mutuality doctrine and that doctrine and the exceptions are the subject of this article. The Constitution of the United States does not specifically give a president the power to conclude executive agreements. However, he may be authorized to do so by Congress, or he may do so on the basis of the power granted him to conduct foreign relations. Despite questions about the constitutionality of executive agreements, in 1937 the Supreme Court ruled that they had the same force as treaties. Because executive agreements are made on the authority of the incumbent president, they do not necessarily bind his successors (agreement). If you need to sue your former tenant for the money you deserve contact one of our skilled landlord tenant attorneys. Rental agreements are vital to any property owner who seeks to lease or rent their property. A real estate lawyer can be of great assistance and can help you to draft and review a rental agreement that suits your business needs. Also, if any disputes arise over a rental agreement, your attorney can help you recover damages in a court of law. Growing dissent in the domestic industry culminated in a watershed year in 2004. Former JAMA Chairman Itaru Koeda went before the press in July 2004 to explain that his organization had in fact found no relationship between speed and road fatalities, which had fallen below 8,000 annually, and he had therefore called for an end to the 280-hp gentlemens agreement. The gloves were now off, and Japan could punch its weight in terms of its engine muscle, unfettered on the international stage. Just as Nissans Fairlady Z had been there to initiate the power ceiling back in 1989, another car was waiting in the wings to mark its abolition. If the client is still hesitant, because they havent seen the results of your work before, a paid trial period can be considered before signing a professional service agreement. According to Dan Lok, a millionaire entrepreneur, speaker, and consultant, there are common objections to retainer fees. Your job is to figure out whats your clients main concern – is it value, money, results, etc.? When creating tasks, Forecasts AI will help you with accurate estimations. Try our auto scheduling feature that allocates resources to tasks automatically. This document is not written with software services in mind. Software is relevant only insofar as it relates to the installation or maintenance of hardware. Maintenance agreements dealing with software are also available. Optional phrases / clauses are enclosed in square brackets. These should be read carefully and selected so as to be compatible with one another. Unused options should be removed from the agreement. Under this agreement, the service provider carries out tasks ranging from the commissioning of new hardware to repairing faults and carrying out regular preventative maintenance. Details are also provided in this template as to what the service provider will not cover. This Hardware Maintenance agreement is designed for use by businesses providing computer hardware maintenance services to other businesses. More than 90% of matters on our trial roll are the Road Accident Fund which is funded through public purse. One would have thought the parties and or legal practitioners in dealing with these matters, will be more expedient and professional. However, the contrary appears to be the case. This is despite continuous financial woes the Fund finds itself in. The court said the judgment of Ntombela v Road Accident Fund 2018 (4) SA 486 (GJ), Kleinhans v Road Accident Fund [2016] 3 All SA 850 (GP) and many others, can be added as reference. The court added that on average, the value of the claims settled by the RAF per month amounts to approximately R 4,1 billion. The fixed operational expenses for the fund are approximately R 800 million per month whereas it receives approximately R 3,5 billion per month from the fuel levy view.

In commercial real estate, the process of understanding the property, the terms of the lease, and the way your tenancy will work is called due diligence. Due diligence requires that you do your homework and pay attention to the physical, financial and legal aspect of the lease. When you’re searching for space and negotiating an office lease, there are some factors that are beyond your control. While you can’t control market trends and occupancy rates that affect costs, there are steps that you can take to get a better lease agreement. Embraer believes strongly that Boeing has wrongfully terminated the MTA, that it has manufactured false claims as a pretext to seek to avoid its commitments to close the transaction and pay Embraer the US$4.2 billion purchase price. We believe Boeing has engaged in a systematic pattern of delay and repeated violations of the MTA, because of its unwillingness to complete the transaction in light of its own financial condition and 737 MAX and other business and reputational problems. United States of America, in each case unless otherwise indicated; (j) any references in this agreement to dollar amount thresholds shall not be deemed to be evidence of a Material Adverse Effect or materiality; and (k) derivative forms of defined terms will have correlative meanings. If there is an employment relationship, accompanied by an employment contract, then the intern is entitled to minimum wage and overtime pay. You can read more about paid/unpaid internships here. Internship 101 Workshops Every other Thursday (Starting April 9th) 2pm-3pm Online (Via Zoom), Register in Handshake The Career Center will go over how internships work, how to find them, and how to set them up for credit. During the internship, the teaching staff member needs to give instructions / tasks / feedback, check results, and read references and reports sent by the company if applicable. If all answers are yes, then you can proceed forward in your internship. To be legally binding, a contract must consist of mutual assent, offer and acceptance and consideration. In summary, this means that a legally binding contract requires both parties to understand the agreement, as well as the terms of the agreement, in order for it to be upheld in a court of law. In the world of skatepark advocacy you will encounter a broad spectrum of agreements. On the casual end of the spectrum you may find people agreeing with your statement informal agreement contract. If you have any questions about this role, please email to Paula McCormack (Area Manager) on paula.mccormack@vinnies.org.au, using the subject line: Shop Assistant – Maroubra enquiry via EthicalJobs. Change inevitably means things will be different to how they were before. Often change can improve situations however, sometimes achieving that improvement can result in a flow on affect that is not so good for all employees. Other times the change proposed can have significant impacts that are not all positive and so further discussion and consideration is needed. Many workers on penalty rates are among the lowest paid. According to the Australian Work and Life Index, 37.8% of workers who work weekends only and receive penalty rates rely on these to meet household expenses agreement. How do I apply for a competent authority determination under Article 4(3) of the New Zealand Australia double tax agreement as modified by Article 4(1) of the Multilateral Convention to Implement Tax Treaty Related Measures Related Measures to Prevent Base Erosion and Profit Shifting (the MLI). 1. Notwithstanding the provisions of Articles 14 and 15, income derived by residents of one of the Contracting States as entertainers, such as theatre, motion picture, radio or television artistes, musicians and athletes, from their personal activities as such exercised in the other Contracting State, may be taxed in that other State. i. to carry out administrative measures at variance with the laws or the administrative practice of that or of the other Contracting State; When Australian tax residents have foreign income the DTA for the country where the foreign income is sourced needs to be reviewed (more). In some cases, the employer will pay for the employee to seek independent legal advice. The reason for this is that if the employee signs a settlement without getting legal advice first, the dispute might still end up in the Employment Tribunal. If youre an employee and you dont want to reach a settlement, you may go to an Employment Tribunal instead. This Settlement Agreement (the Agreement) states the terms and conditions that govern the contractual agreement between [PLAINTIFF] (the Plaintiff), and [DEFENDANT] (the Defendant) who agrees to be bound by this Agreement. In cases where youve reached a settlement while having a tribunal hearing and the tribunal placed your claim on hold for a specific amount of time, you may ask them to revive your claim if your employer doesnt hold up his end of the agreement within the specified time (settlement agreement samples). To facilitate greater cross-border trade, the United States has reached an agreement with Mexico and Canada to raise their de minimis shipment value levels. Canada will raise its de minimis level for the first time in decades, from C$20 to C$40 for taxes. Canada will also provide for duty free shipments up to C$150. Mexico will continue to provide USD $50 tax free de minimis and also provide duty free shipments up to the equivalent level of USD $117. Shipment values up to these levels would enter with minimal formal entry procedures, making it easier for more businesses, especially small- and medium-sized ones, to be a part of cross-border trade. Below is the list of collective agreements for each of the five unions at Dalhousie University. If you are not sure which union you belong to, please contact Human Resources at 494-3700 or hr@dal.ca. DFA – Dalhousie Faculty Association (full-time faculty, instructors, librarians, counselors) PSAC – Public Service Alliance of Canada Local 86001 (post-doctoral fellows) NSGEU – Nova Scotia Government and General Employees Union Local 77 (administrative and technical support) . CUPE – Canadian Union of Public Employees (lecturers – less than 50%, markers, demonstrators, TAs) https://altenpflege.team/nsgeu-csrss-collective-agreement/.

Although there are some practical challenges, the PF authorities have been constantly coming out with clarifications in support of the successful implementation of the SSAs. The increase in coverage of countries under the bilateral agreements combined with proper implementation, creates significant benefits for the mobile population, with their employers and hence, is a step in the right direction. India is positive about the talks as new social security schemes have been introduced in the country over the past few years and the coverage has also widened, leading to greater compatibility of the two coutries systems, an official close to the development told BusinessLine. India is positive about the proposed talks with the US Social Security Administration (SSA) on the long-pending totalisation agreement, as it believes the systems of the two countries are more compatible now than earlier http://www.dianneeastman.com/blog/?p=5394. MBIE has undertaken an evaluation of New Zealands conformity assessment mutual recognition agreements and arrangements (MRAs). MRAs are designed to help exporters and importers by reducing the time and costs of obtaining approval for their products to be sold in a particular market. This arrangement was adopted as a Pathfinder Initiative in the 10th APEC Economic Leaders’ Declaration to facilitate trade in regulated electrical and electronic equipment. The exception is the MRA covering medicinal products with the EU. This agreement is significantly facilitating trade and is highly valued by exporters, importers and regulators. Singapore also has an arrangement with Taiwan for EMC and electrical safety new zealand’s electrical and electronic product mutual recognition agreements. Verify that the user has already received a copy of these materials or that you have already sent this user a copy. In the original BSD license, both occurrences of the phrase COPYRIGHT HOLDERS AND CONTRIBUTORS in the disclaimer read REGENTS AND CONTRIBUTORS. Software may contain Java technology. You may not create additional classes to, or modifications of, the Java technology, except under compatibility requirements available under a separate agreement available at www.java.net. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License (http://www.thebensmith.com/sophos-end-user-license-agreement/). Clickwrap is a contract that both sides have to comply with by law. How you write your clickwrap agreement is important in case a user has a problem later. The reviewing court decided that Zoocasa had notice of Century 21’s browsewrap agreement and Zoocasa accepted it by their continued use of the website listings. Check out the TermsFeed Free Tool Solution – I Agree Checkbox and enforce your legal agreements in 3 easy steps. As you’ll see in the next chapter, it matters a lot if you choose clickwrap instead of browsewrap regardless of the legal agreements your business has more. Kovind, who was conferred with Croatia’s highest civilian award — the Grand Order of the King of Tomislav, said, “I accept this honour with great humility. Let me dedicate this award to India-Croatia Friendship. May this special gesture strengthen our friendship forever.” “#PresidentKovind and President of Croatia Mrs Kolinda Grabar Kitarovic witnessed signing of four MoUs between both countries in the field of tourism,sports, establishment of chairs in #Sanskrit and #Hindi,” Ministry of External Affairs spokesperson Ravish Kumar tweeted soon after signing of the agreements. Four agreements on co-operation were signed in Zagreb, two from the field of education and two from the field of tourism and sport agreement. In a usual joint development scenario, the owner(s) enter into a JDA with the developer setting out the terms of understanding, such as the ratio of sharing of built up area in the proposed building, advance (refundable or non refundable), time for completion of the construction, consequences for delay/default, authority to obtain approvals, undertake construction, mortgage or sale of the developers share etc. As on date, there is no provision to register a JDA (including amendments or supplemental deeds) and the same would be valid and enforceable even without registration. …1. The petitioner is the owner of Acs. 25-416 guntas in Survey Nos http://lyme-suisse.ch/2021/04/12/stamp-duty-on-joint-development-agreement-in-bangalore/. Shareholders agreements are legally binding contracts and they should be prepared by an attorney to be sure they comply with state laws and can be taken to court. The agreement can terminate when all shareholders agree, or on a specific termination date. However, the unanimous shareholder vote should only be used when there is a relatively small number of shareholders, the company is not seeking additional shareholders, and the existing shareholders have a good working relationship. Shareholders agreements are governed by state laws, but federal lawsspecifically regulations by the Securities and Exchange Commission (SEC)are involved because shares are securities, especially shares available to the public. Company Law Solutions provide a shareholders’ agreement service ideally suited to the smaller company (https://www.pcnoesis.gr/define-shareholders-agreement/). Paul Hardingis managing director ofDerivatives Documentation Limited, a consultancy providing negotiation, training and recruitment services in derivatives documentation. He is also the author of Mastering the ISDA Master Agreement (1992 and 2002) Why should I consider participating in the 2002 Master Agreement Protocol? For example, many of ISDA’s pre-2002 definitional booklets contain provisions that rely upon the use of the procedures of “market quotation” or “loss” to calculate a sum due between the parties on close-out of a transaction affected by a particular event or circumstance or as a valuation measure for other purposes. Both market quotation and loss are defined in the 1992 Master; neither is defined or has any particular relevance in the context of the 2002 agreement (http://yagr.me/2002-master-agreement-protocol/). The Parties agree, that without prior consent, no portions of this agreement may be transferred, sold, or given to third party individuals. Failure to pay constitutes a breach of contract. A reserves the right to terminate exclusivity agreement. If termination occurs, B is still responsible for all funds due. A also has the right to take legal action to recoup fees due. PandaTip: Once this template is completely filled in, the Seller and Buyer can sign it electronically from a computer or mobile device. PandaTip: An exclusivity agreement gives you the sole right to sell products or services to another organization.

For example, if parties to a contract sign a non-disclosure and confidentiality agreement, it may be necessary to create a supplemental agreement down the road to clarify the information that is subject to the non-disclosure rules. This would not be changing the initial agreement, but rather expanding on the intended meaning of the original contract. Thus, it is evident that supplemental agreements can be quite useful to ensure adequate understanding of a particular portion of a contract. The key with these agreements is to make is abundantly clear which section of a contract must be expounded upon. It is important to note that compensation agreements may be used between firms or between a firm and an individual. For example, a compensation agreement may be drafted to explain the payments that will be made to an individual for contracted consulting work here. Ideally, this can occur, and the agreements can be submitted to the Fair Work Commission to be approved well in advance of the Queensland Election. All employees at Energy Queensland are entitled to superannuation benefits. Under the Energy Queensland Union Collective Agreement, Energy Super is the default fund for Energy Queensland employees. Energy Super is a platinum-rated* superannuation fund dedicated to employees who work in the energy industry. Employees employed on an Individual Contract agreement may elect choice of fund. Like all professional industries, property development requires a huge set of skills. It takes time and effort to master property development and the success of most projects comes down to the skill of the developer. Although these are the most common situations, you should always have a joint venture agreement in place if youre carrying out a property development with two or more parties. Think about how a JV can affect your property business and whether its something you should be considering more actively. Another thing to keep in mind is that the way the profits are shared can impact on whether the joint venture is a tax partnership. If the joint venture is a tax partnership, this means that the parties are jointly and severally liable and that partnership tax returns must be lodged (link).

http://ahealthydoseoffaith.com/blog/index.php?p=150

Optical Dynamics Remains Open for Business!

You may order supplies and lenses from Optical Dynamics. We are open and ready for business. To place supply orders online visit: http://www.opticaldynamics.com/order or fax orders to 888-900-5504.

Are you operating with limited staff? Let Optical Dynamics cast your lenses for you! Order clearLIGHT advantage and sunSMART photochromic with or without nanoCLEAR AR through our ready-to-edge program. Print and use the below order form for easy processing.

 

 

 

COVID-19 Update from Optical Dynamics

To Our Valued Customers,

In response to COVID-19 state and local guidelines, Optical Dynamics will has adjusted our operating hours.

Technical Support will be available Monday – Thursday from 10:00AM to 2:00PM Eastern Time 800-587-2743 option 4.

Orders may be placed online at http://www.opticaldynamics.com/order or via fax at 888-900-5504.

Shipping of orders will occur on Wednesdays only, regardless of the day received. All orders are shipped UPS ground unless another shipping method is requested.

Customer Service lines remain open. If connected to voicemail, be sure to leave a message and we will return your call as promptly as possible. 800-587-2743 option 6.

The health and safety of our team members and support of our customers remain our top priority. We are doing are part to reduce the spread of COVID-19 and we appreciate your patience and understanding during this unprecedented time.

Stay healthy and please contact us with any questions.

Sincerely, Your Friends at Optical Dynamics

 

Meet Rafael Ortiz, Sales Manager

Rafael started his career in 1983 in a small optical shop assisting customers and working in the lab. Selling eye glasses, tinting, and cutting lenses, Rafael’s interest in optics grew and led to his enrollment in a certified optics program in 1987. While in school, Ralph apprenticed as an optician until 1989.

Upon graduation from his apprenticeship, he took a position with Lenscrafters starting out as lab manager then moving to general manager as a certified optician. Working in the retail store environment, Rafael learned the importance of impeccable customer service and quick turnaround of lenses. His optical career continued as store manager for Sterling Optical.

In 2000, Rafael came to work for Optical Dynamics as a lens consultant, retail trainer and equipment installer. Coming from a retail background, he understood the needs of the independent optical location as related to product quality and delivery time. For nearly six years he traveled the country training optical locations on how to process, sell and dispense their customized lenses.

In 2009, Rafael was promoted to Sales Manager for Optical Dynamics & Vision Dynamics Lab. With his unique background in custom processed lenses and retail training, Rafael is the perfect person to guide labs and retail locations through the maze of available products for improved lab service and business profitability!

How Does My Q-2100™ Compare?

How do i compareHow does my Q-2100 Digital Lens System compare to other in office lens systems?

Your Q-2100™ Digital Lens System with nanoCLEAR™ AR delivers proven, quality progressives in regular and short corridor, ASV and FT-28, with market vetted design acceptance and AR performance. Your Q-2100 utilizes digitally mastered reusable crown glass molds that allow you to produce premium index clearLIGHT™ lenses, one of three premium sunSMART™ photochromic varieties, blueVIEW, amplifEYE or five nanoCHROME mirror colors.

With an extensive power range of +4.00 to -6.00/-2.50 cylinder and the optimal use of four base curves, your system will produce a wide range of premium lenses that are on power each and every time. With a Q-2100 system, the more lenses you produce the lower your cost per pair when factoring in the equipment cost. Optical Dynamics’ philosophy has always been the on-going material and coating costs must be as low as possible. You invest in the platform and then maximize profits from the low cost lenses you produced. This provides the best possible return on investment.

Your Q-2100 system maximizes your profits by minimizing the number of items that need to be stocked and reordered. If you have monomer, coating and gaskets you can make any power lens in any design. While you can do the majority of lenses in-office, there are times when you need specialty lenses or out of range Rxs. With support from Vision Dynamics Lab for out of range product, you can keep your patients in the same great materials and designs by ordering uncut lenses at market leading prices. We offer this as a value added benefit for all Q-2100 system owners.

For  practices that want to offer a broad range of lenses, materials and coatings, are interested in dramatically reducing costs and understand the value of over two decades of market success and 150 issued worldwide patents, the Q-2100 is the choice for you.

Optical Dynamics & Vision Dynamics Lab to Attend VEE

VEE LogoRepresentatives from Optical Dynamics and Vision Dynamics Laboratory are pleased to attend this year’s Vision Expo East Friday March 27th through Sunday March 29th at the Jacob Javits Center in NYC. Although we will not exhibit at the event, team members will be available for onsite appointments should you wish to meet and discuss our in-office lens technology, photochromics, color enhancing sun line, glass, or fixed tint products.

Attendees include:

  • John Dippold, President ext. 285
  • Michael Yager, VP Sales ext. 291
  • Eric Lindquist, National Sales Manager Lab Services c. 801-205-6133
  • Julianne West, Marketing ext. 253

For appointments, please call 800-797-2743

Exhibit hours for the event are as follows:

  • Friday March 27th 9:30am – 6:00pm
  • Saturday March 28th 9:30am – 6:00pm
  • Sunday March 29th 9:30am – 5:00pm

We look forward to meeting with you at this year’s event!

Reduce Spectacle Remakes

IMan Fitting  Glasses on Girln an article published in Optometric Management, author and Q-2100 system owner Dr. Jim Davis shares five steps to help optical professionals reap the benefits of providing an optimum pair of glasses. No one wants upset patients claiming they can’t see out of their new eyeglasses in a waiting room full of patients!

Step One: Double check the refraction. According to Dr. Davis, “I rarely change a prescription more that +/-0.75D so when a patient’s prescription has changed more than that amount I have found the number of remakes increase, so I always examine the patients previous refractions to ensure I haven’t made an error prior to recording the new Rx.”

Step Two: Manage the patient’s expectations. “If the patient’s prescription has changed significantly, educate them on what specifically they can expect with the new prescription,” says Dr. Davis. “And always take the time to educate first time progressive wearers,” added Davis.

Step Three: Have a well educated optical staff. “Always make sure your staff understands appropriate frame selection, pupillary distance and seg height along with proper patient positioning,” advises Davis.

Step Four: Always check lens powers. “Another way to prevent spectacle remakes is to always check the lenses your lab produces as soon as they arrive,” recommends Davis. By checking the lenses before they are dispensed you can catch any lab production errors.

Step Five: Provide a written policy. Dr. Davis recaps his recommendations with the suggestion for a written policy. “Give your patients a written policy on re-makes before they leave the office with their new spectacles. Although completely avoiding spectacle remakes is impossible, the five aforementioned tips can reduce them and result in more happy patients,” Davis adds.

nanoCLEAR AR Alarm – Suction Rings?

Topic: My nanoCLEAR AR system was running a job when I received the following message: MOLD DID NOT RELEASE FROM SUCTION, what does this mean?

The Reason Why: The mold the system has just coated is stuck to the suction ring and is not releasing into the mold stage. As you run jobs, costing adheres to the edge of the suction ring which can become sticky making it difficult to release the mold.

The Fix: As part of daily maintenance, the suction ring should be removed at the end of each production day and inspected. If the suction ring shows coating build up, it should be cleaned and scrubbed in your Q-soak tub. The suction ring is a disposable item and should be replaced when coating cannot be easily removed. It is also good practice when placing a new suction ring on your system to clean it with the same process to ensure proper suction with the surface of the mold. Remember to always keep an extra suction ring in inventory so you can pull as needed.

Topic: My mold was going through the coating cycle when I received the following message: MOLD DROPPED DURING CYCLE

The Reason Why: The mold has released from the suction ring during the process as the suction pressure has been compromised.

The Fix: When you remove the suction ring at the end of day to inspect, check for any cracks in the surface of the ring. Overtime, the ring may become cracked, causing the suction ring to lose vacuum pressure. If this is the case, dispose of the old suction ring and replace it with a new ring. As mentioned above, remember to clean the new ring in your Q-soak tub to ensure proper suction. Always keep an extra suction ring in inventory for ongoing production.

Dispensing Glass

Did you know Optical Dynamics’ partner lab Vision Dynamics Laboratory is the largest independent glass lens processor in the U.S.?

Read a Q&A on dispensing glass as shared in Eyecare Business

Question: Are there restrictions on using glass lenses?

Answer: In general, most people benefit from the superior visual clarity provided by glass lenses. In higher prescriptions, the dispense and customer must manage the frame dimensions. Glass lenses are usually contra-indicated for children, those patients participating in high-impact activities or anyone who has limited vision in one eye. Mike Yager, Vision Dynamics Lab.

Question: Does dispensing glass lenses present any particular challenges in fitting or processing?

Answer: Processing glass lenses presents some interesting challenges for labs. As a glass lens processor yo must have specific equipment dedicated to only processing glass. The lab mus also have people experienced in processing glass which is quite different than plastic. Each index has its own characteristics and nuances including how lenses are chem-hardened at the end of the process. Because of this only a handful of labs are comfortable or skilled in processing glass. Mike Yager, Vision Dynamics Lab