Flash Fill Unit Troubleshooting

My flash fill stand will not turn on? First double check to make sure the unit is plugged in and the power switch is on. Next, double check the fuses in the back of the unit. If neither are the cause, please give the technical support department a call.

My flash fill stand seems to be leaking from the valve? First, make sure the valve is completely closed. Next remove the valve knob by twisting counter clockwise and pulling. Look to make sure that the two red rubber gaskets are seated inside the valve needle opening. Finish by cleaning the valve knob with IPA and a lint free cloth. If additional help is needed, please call technical support.