Cleaning the fill stand

1. Clean any monomer spills and overflows immediately
2. Wipe off the bottom of the valve at the end of every

Flash Fill Stand Trouble Shooting

No power to the fill stand

1. Make sure the unit is plugged in and the power switch is on
2. Check the fuses in the back of the unit

3. Call the Optical Dynamics Service Department 800-587-2743

Fill stand does not heat properly

1. Make sure the unit is plugged in and the power switch is on
2. Check the fuses in the back of the fill stand
3. Call the Optical Dynamics Service Department 800-587-2743

Monomer leaking from the valve

1. Make sure the valve is completely closed
2. Remove the valve knob by twisting counter clockwise and pulling
3. Make sure the two rubber gaskets are seated inside the valve needed opening
4. Clean valve knob with IPA and lint free cloth
5. Call the Optical Dynamics Service Department 800-587-2743

Oops, I mixed different monomers

1. Turn unit off immediately
2. Call the Optical Dynamics Service Department 800-587-2743