Why Dispense Digital Lenses?

With the Q-2100 you produce digital quality lenses through a patented lens production process that utilizes digital glass molds on both the front and back surfaces of the lens.

This digital process is the only process that eliminates direct machining or polishing of either lens surface for a clarity of vision that cannot be achieved any other way.

Q-2100 digital lenses mirror the surface quality and prescription accuracy of the glass mold to an exacting tolerance.

Each digital lens is processed in premium index materials custom made to the patients finished Rx.

Dispense digital lenses to upgrade the visual clarity of every patient!

Flash Fill Stand Maintenance

Cleaning the fill stand

  1. Clean any monomer spills and overflows immediately
  2. Wipe off the bottom of the valve at the end of every

Flash Fill Stand Trouble Shooting

No power to the fill stand

  1. Make sure the unit is plugged in and the power switch is on
  2. Check the fuses in the back of the unit

3. Call the Optical Dynamics Service Department 800-587-2743

Fill stand does not heat properly

  1. Make sure the unit is plugged in and the power switch is on
  2. Check the fuses in the back of the fill stand
  3. Call the Optical Dynamics Service Department 800-587-2743

Monomer leaking from the valve

  1. Make sure the valve is completely closed
  2. Remove the valve knob by twisting counter clockwise and pulling
  3. Make sure the two rubber gaskets are seated inside the valve needed opening
  4. Clean valve knob with IPA and lint free cloth
  5. Call the Optical Dynamics Service Department 800-587-2743

Oops, I mixed different monomers

  1. Turn unit off immediately
  2. Call the Optical Dynamics Service Department 800-587-2743